SHX 400kw Backup Diesel Generator 440kw 550kva Standby Cummins
Power Generator
Features
- Standard open type is good to working in engine room with
ventilation system.
- The super silent model ( up to 50kw ) has electronic cooling fan
and special design low noise level canopy, which is specialized for
low noise level environment, such as office building, villa,
museum.
- Standard soundproof type ( IP21 ) will be working perfectly in the
open air
- All standard type can be working in 3rd explosive area for mining
industry, special design will be suitable for 2nd explosive area.
- All functional components are modular design, for fast repair,
replace, and reduce stock, which can satisfy rental business.
- 50℃ radiator
- IP54 ( soundproof sets ), IP56 ( control system )
- Base fuel tank for at least 8 hours running
- For friendly experience, all I/O control interface and daily
maintenance parts are combined in one side.
Specification of 400kw Cummins diesel generator set
| Genset Model | SCF550 |
| Prime Power | 400KW/500KVA |
| Standby Power | 440KW/550KVA |
| Phase Number | 3 |
| Power Factor | 0.8 |
| Rated Voltage | 230/400V |
| Frequency | 50Hz |
| Rated Current | 163A |
| Genset Structure | Silent type |
| Dimension | 4600×1600×2300mm |
| Net Weight | 4450KG |
| Noise level | 75dB at 7 meters |
| Fuel Tank Capacity | 8 hours |
| Engine Model | QSZ13-G3 |
| Engine Features | 6-cylinder, 4 stroke, water cooled, turbo |
| Bore * Stroke | 130mm × 163mm |
| Displacement | 13L |
| 12-hour Power(kw) | 4406KW/1500 |
| Fuel Consumption (g/kw.h) | 191 |
| Compression Ratio | 17:1 |
| Governor type | Electronic |
| Alternator Model | Farrand / FLD544D |
| Excitation Mode | brushless self-excited |
| Insulation Class | H |
| Protection Class | IP23 |
| Construction Type | SAE Disc-coupling |
| Controler panel | Deepsea/ ComAp/ Smartgen |
| Function | intelligent and network techniques is used for automatic control
system of diesel generator. It can carry out functions including
automatic start/stop, data measure and alarming.automatic switching
control functions (AMF), especially suitable for the automation
system composed by Mains and Generator |
INSPECTION AND TEST
1 GENERAL
1.1 Each engine shall be tested at manufacturer’s workshop to
certify the engine output and fuel consumption in accordance with
the site operating condition specified by purchaser on the
specification datasheet.
1.2 All relevant information drawings pertinent to the testing and
test procedure shall be transmitted to the purchaser in advance of
the test date notification.
1.3 The purchaser shall call for additional testing if test results
are unsatisfactory or marginal. Any equipment rejected shall be
repaired or replaced to the purchaser’s satisfaction and tests
shall be repeated.
1.4 Any unsatisfactory material, equipment, installation, or
workmanship shall be replaced or repaired to the purchasers
satisfaction at the manufacturer’s cost.
1.5 The engine and generator shall be tested individually in
accordance with relevant standards specified above.
1.6 The completed and individually tested engine and generator
shall be assembled onto the base plate with all auxiliaries,
instruments and controls for a complete test of the generator set.
Invitation to visit our factory
1. If you are interested in our products we sincerely invite you to
take a visit of our factory when you are in China.
2. Our factory locates in Foshan City, which is famous for its
ceramics, is just 45 minutes away from Guangzhou, and 35 minutes
away from Canton fair.
3. When you come to Guangzhou or Canton fair, we can send cars to
pick you up and take you to our factory.
4. In the factory we can discuss more about the cooperation and we
will listen to your requirements.
